TSPROF K03 Pro Hunter Kit Knife Sharpening System TS-K3P220020
The K03 Pro, TSPROF top-of-the-line sharpener, will help you get a perfectly sharp edge of the blade even faster, with more precision and convenience. Included with the sharpener is Axicube-I, the first electronic angle finder designed specifically for sharpening systems. Setting the angle with an accuracy of 0,1° has never been so easy and convenient, the angle finder is integrated directly into the abrasive holder. The abrasive holder itself consists of two steel guides. A specially shaped coupling ensures a rigid and accurate connection. No deflection and maximum precision. The rack and pinion lift is equipped with a steel rail with involute (toothed) gearing, allowing step-less adjustment of the sharpening angle. The slide is driven by a brass-toothed wheel, the steel-brass pairing ensures smooth movement of the slide. A laser marking of the sharpening angle is affixed to the slide for ease of reference. The K03 Pro requires no calibration and is assembled in minutes.
The K03 Pro body has no horizon deviation and the knife is clamped parallel to the table. The modern rack and pinion lift, which has a rail with involute (toothed) gearing and step-less adjustment, allows you to set the angle with an accuracy of 0.1°. The height adjuster with extended angle, due to its improved design, will allow you to sharpen knives in a range of angles from 8° to 39°, which allows you to sharpen to a total angle of up to 78°.
The sliding part is connected to the base by a dovetail, which guarantees absolute precision of the angle setting. An additional lifting rod is used to increase the angle of sharpening. The locking screw allows the lift to be rigidly fixed during deburring operations. Fixing its position is now more convenient: the locking screw can be installed on both sides of the body. The response part of the lift is made of a durable polymer material - polyacetal. It is a super strong and high-performance polymer with a density of 1.420 g/cm3. Polyacetal has excellent antifriction properties, providing excellent smooth running of the rack and pinion lift. The polymer is black, highly wear and abrasion-resistant. It retains its initial appearance and smooth shiny surface for a long time. A steel rail is responsible for the operation of the lifting mechanism. An angle measurement scale is applied on the front side of the slide and allows you to control the setting of the angle visually.
The unique rotating mechanism has a wide lever that makes rotation easy and ensures reliable auto-locking of the clamping frame. Thanks to the system of springs and bearings, the frame turns over without the wear of the mechanism. The body of the auto-flip system is made of durable aircraft-grade aluminum anodized in black.
The universal holder allows you to use any abrasive stones with the sharpener, both on blanks and without them. The abrasive holder has no metal plate, but thanks to the special geometry of the stops, it allows you to fix the abrasives as securely as possible. The abrasive holder bar has an increased length of 694 mm, is made of steel and has high rigidity. The holder rod is collapsible and joined by an aluminum sleeve coupling, with a three-point mounting, which gives the maximum alignment of the connection. The rod is equipped with a convenient thumbscrew for adjustment which allows the rod to be connected in one motion. The set includes 5 abrasives on aluminum blanks suitable for whole knife sharpening, from roughing to finishing. The electroplated diamond plates provide intensive metal removal and can be used for knives with significant damage (chips, dents, etc.).
The Axicube-I angle finder is developed specifically for sharpening systems and is integrated into the body of the holder's movable stop which allows real-time monitoring of the sharpening angle. The Axicube is rigidly connected to the abrasive holder and is in the plane of the abrasive stone. This allows maximum angle accuracy during use. Axicube allows you to set the angle with an accuracy of up to 0.1°. The angle finder has a durable aircraft aluminum housing and is resistant to vibrations. Can be used in temperatures from 0°C to +40°C. Charges from a standard micro-USB charger. Each Axicube is calibrated at the factory with verified measuring instruments. Before use, a special calibration plate is used to give it an initial reference angle. If the sharpening device is moved to another surface, a new calibration with the plate is required.